The Truma iNet X Panel can be operated from your phone. As long as you are at the vehicle, that works over Bluetooth and costs nothing. It gets interesting on the way home from skiing or on a Friday at the office: how do you reach your heater remotely without taking out a subscription?
The answer: with a box that you pay for once and that has no fixed monthly costs after that. What it can do, what it costs and how to set it up is all here.
At a glance
- Nearby: the Truma app connects to the panel over Bluetooth, free of charge and with no extra module.
- On the go: Truma offers the iNet X Connect for this. According to Truma, two years of remote access are included; after that the service is subject to a charge.
- No subscription: CampMatic for Truma iNet X pairs with the panel via Bluetooth and goes online via Wi-Fi or 4G. A one-off €149 (WiFi) or €189 (4G), with no fixed monthly costs after that.
- No requirement on the panel: power via USB cable, no cable to the heater.
Close by: Bluetooth is enough
In and around the vehicle you need nothing else. The Truma app connects directly to the iNet X Panel over Bluetooth. Turning up the heating from bed, switching on hot water: that works without accessories and without running costs.
Bluetooth only reaches a few metres, though. For anything beyond that, the panel needs a connection to the internet.
On the go: the official route with iNet X Connect
For that, Truma offers the iNet X Connect remote module. It is installed in addition and connects the iNet X system to the app over the mobile network. It is the official solution from a single source, approved and supported by Truma.
According to Truma, two years of remote access are included with the purchase. After that the service is subject to a charge and can be extended in the app. Truma provides the current terms.
No subscription: CampMatic for Truma iNet X
If you would rather pay once, go for CampMatic for Truma iNet X. The small box connects to the panel via Bluetooth and is powered via a USB cable. It goes online in one of two ways:
- WiFi variant: via an existing Wi-Fi network in the vehicle, for example a mobile hotspot.
- 4G variant: directly over the mobile network with your own SIM card.
In the CampMatic app, for iPhone and Android or as a web app in the browser, you then have access from anywhere to:
- heating: room temperature, mode, energy source or energy mix and heating level,
- hot water with its levels,
- the panel's timers: create, change, delete, switch on and off. They keep running on the panel, even without a connection,
- tanks and electrical system: fresh and grey water (if an electrical block is connected to the panel), leisure and starter battery, shore power and water pump,
- a Truma air conditioner on the panel and gas bottles via a Truma Level Control on the panel.
On top come notifications, a Telegram bot, external Bluetooth sensors such as Mopeka, BM2, RuuviTag, Victron or Senso4s, and the connection to Home Assistant via MQTT. All features with screenshots are in the article CampMatic for Truma iNet X is here.
What you pay once and what you pay on an ongoing basis
- Once: the box, €149 as the WiFi or €189 as the 4G variant.
- Ongoing at CampMatic: nothing. The app and access via our server are free, and there is no subscription.
- Internet in the vehicle: that is up to you. The WiFi variant uses your existing Wi-Fi and needs only a few megabytes a month. For the 4G variant, an IoT SIM from around €2 a month is enough.
Set up in a few minutes
- Bring the box online: power it via the USB cable, bring it online via Wi-Fi or SIM card and register it in your account. Place it within Bluetooth range of the panel.
- Close the Truma app. The panel needs a free slot in its device list.
- Start pairing: in the CampMatic app, open Settings and tap "Pair panel" on the "Truma iNet X panel" card.
- On the panel, choose "Add device" and tap "Pair now" in the app. The green bar in the app shows the connection.
The detailed guide with troubleshooting is in the help section.
Frequently asked questions
Do I need iNet X Connect for this?
No. The CampMatic box goes online itself, via Wi-Fi or 4G.
Can I keep using the Truma app?
Yes. The panel keeps only one Bluetooth connection at a time. If you want to use the Truma app in between, tap "Release for Truma app (30 min)" in the CampMatic app.
Does the heater need a particular software version?
No. For the box for Truma iNet X there is no requirement on the panel.
I don't have an iNet X but a CP Plus with an iNet Box.
There is a separate box for that: Truma iNet Box: control your heater by app – no subscription.
→ CampMatic for Truma iNet X · WiFi — €149
→ CampMatic for Truma iNet X · 4G — €189
Further reading: