Your Camper.
Your Comfort.
Your Control.
Keep an eye on gas bottle, onboard battery, solar and indoor climate, and control your Truma heater from your phone — from anywhere. Plug & play in 10 minutes. From €89, with heater control from €149.
- Truma Combi4 · 6 · D 4 · D 6, also as E
- Truma Vario HeatSpace heating
- Truma iNet X PanelHeater, tanks, power, timers, A/C
- Truma air conditionerfully controllable on the iNet X Panel, beta on the CP Plus
- BM212 V: lead-acid, AGM, gel, LiFePO4
- Victron SmartShuntState of charge, current, time remaining
- Victron BMV-712 SmartState of charge, current, time remaining
- MopekaPro Check, Pro+, Universal · water tank with H2O
- Truma Level ControlSteel and aluminium bottles, 5 to 33 kg
- Senso4sGas scale, BASIC and PLUS
Tap an icon to see supported devices
Do you have a Truma Combi or Vario Heat on board?
CampMatic for Truma
Control heating & hot water from your phone. Gas & battery monitoring is already included — no second device needed.
CampMatic Guard
Keep an eye on gas bottle & onboard battery remotely — via app and Telegram. For every camper, whatever the heater.
Full Control. From Anywhere.
CampMatic makes your heater controllable over WiFi or 4G — with an app, Telegram bot, MQTT and many extras. Compatible with Truma Combi and Vario Heat.
Heating Control
Room heating & hot water control, set target temperature, choose energy mix and adjust fan mode — all via app.
Air Conditioning Control
Fully controllable on the Truma iNet X Panel: cool, auto or vent, target temperature and cooling level. On the CP Plus as a beta for Aventa and Saphir compact – with fan level and heating on units with a heat pump.
Supported models →Live Monitoring
Room and water temperature, onboard battery voltage and gas bottle level — all live in the app. Target vs. actual, heating status and connection at a glance.
Temperature History
48-hour chart with room and water temperature. Target and actual values compared with automatic updates.
Notifications
Email and Telegram — configurable per event. Target temperature reached, frost alert, heating on/off, box offline.
Telegram Bot
Control heating, check gas and onboard battery levels — all directly in chat. /status, /control, /set 22. With push notifications and multi-user support.
Heating Scheduler
Schedule heating times to start automatically. Create daily and weekly plans — your camper is warm when you arrive.
CampMatic App
As an app for iPhone and Android, or in the browser on any device. Dark mode, light mode, English and German.
Gas, Battery & Environment Monitoring
Gas bottle levels, onboard battery state and environment readings (temperature, humidity, air pressure) live in app and Telegram — via Bluetooth sensors. Already included in the CampMatic for Truma boxes — or as a standalone CampMatic Guard for every camper without a Truma heater.
Learn more →Gas, onboard battery & solar always in sight
With the new CampMatic Guard you get gas bottle level and onboard battery voltage live in the app — wherever you are. Guard also reads Victron solar charge controllers and battery monitors (SmartSolar, SmartShunt, BMV-712 Smart): PV power, yield today and state of charge. Automatic notification the moment gas runs low or battery voltage drops below your threshold. Also included in all CampMatic for Truma models.
Enough gas for the barbecue weekend? Is the fridge still running while you are at the beach? Will the battery last off-grid? Guard knows — before you have to ask.
Gas bottle
When you don't need to control a Truma heater but still want to know remotely how full your gas bottle is and how charged your onboard battery is. CampMatic Guard reads Bluetooth sensors for gas (Truma Level Control, Mopeka or Senso4s), onboard battery (BM2), climate (Ruuvi) and solar (Victron), and shows everything live in the app and via Telegram.
Composite, plastic and lightweight bottles too: where an ultrasonic sensor cannot measure, the bottle stands on a scale. CampMatic reads the Senso4s BASIC and PLUS over Bluetooth — here the level is derived from the weight.
Onboard battery (BM2)
Works with off-the-shelf BM2 Bluetooth battery monitors. Multiple BM2 sensors supported in parallel — monitor auxiliary and starter battery simultaneously, for example.
24-hour history right in the app. Perfect for long winter storage or before your next trip.
Environment (Ruuvi)
Temperature, humidity and air pressure inside your vehicle — live in the app. Perfect for keeping an eye on the fridge, frost warnings in winter or the indoor climate. RuuviTag via Bluetooth, multiple sensors in parallel.
All sensors, models and the smart-home connection (Home Assistant, MQTT, ioBroker)
Works with any camper — no Truma heater needed. The CampMatic for Truma boxes already include this monitoring.
CampMatic App
Intuitive app with live temperatures, heating control and 48h history.
Status & 48h history
Live system status, 48-hour temperature history and customizable notifications.
CampMatic as an app for iPhone and Android
Our native app is available on the App Store and Google Play. It does everything you know from the web app, and adds more:
- Push notifications straight to your phone
- Unlock with fingerprint or face
- Wi-Fi setup of the WiFi box via Bluetooth
Prefer not to install anything? The web app at campmatic.de/app stays available as always – in the browser on phone, tablet and laptop.
How to set up the box with the appReady in 10 Minutes
One plug to the Truma, 12V power — that's all it takes. No soldering, no crimping, no cable routing.
The steps below describe installing the box for the Truma CP Plus (iNet Box system). With a Truma iNet X panel there is no connection to the heater: plug in the USB cable and pair the box with the panel in the app. CampMatic Guard is just as simple: connect the USB cable — done.
Connect Heater
Easiest at the back of the CP Plus: unplug the RJ12 cable, put the splitter in between — one output back to the CP Plus, one to the CampMatic. Or straight into the free LinBUS socket of the Truma Combi.
12V Power
The box only needs 12V — from any 12V source in your camper, or conveniently straight from the CP Plus. A connection to the CP Plus is not required.
Connect & Go
Place box in service compartment, connect via WiFi or 4G — done!
Place the box in a protected, dry area near the Truma heater — e.g. in the service compartment under the bench seat (VW Grand California) or a similar compartment.
Will it fit my camper?
The points below apply to CampMatic for Truma, by control panel: the Truma iNet X panel has no special requirements, while the firmware details apply to the CP Plus (iNet Box system). CampMatic Guard runs in any camper with USB power — a Truma heater is not required.
Truma iNet X
The CampMatic box for Truma iNet X connects to the panel via Bluetooth: no cable to the heater, no firmware check. Simply order, power it via USB and pair it in the app. See all details →
Truma CP Plus (iNet Box system)
CampMatic works in any vehicle with a compatible Truma heater and CP Plus control panel (C4 or F4; Vario Heat: P5).
Truma Combi 4 (gas), Truma Combi 4 E (gas/electric), Truma Combi 6 (gas), Truma Combi 6 E (gas/electric), Truma Combi D 4 (diesel), Truma Combi D 4 E (diesel/electric), Truma Combi D 6 (diesel), Truma Combi D 6 E (diesel/electric), Truma Vario Heat (gas).
Check in INIT menu: Settings → INIT → version starts with C4 or F4. On the Vario Heat it reads P5.xx.xx instead — that works too.
Aventa compact plus (incl. 2nd generation), Aventa compact, Aventa comfort (from serial number 24084022), Aventa eco and Saphir compact. Air conditioning control is a beta that you switch on yourself in the app; the firmware update it needs is available on request. Details →
Older protocol — data readable but no control possible. Upgrade to C4 available.
CampMatic simulates an iNet Box. An original iNet Box must be removed first.
CampMatic for Alde heaters is in development. Join the waitlist below. Join the waitlist →
Truma® is a registered trademark of Truma Gerätetechnik GmbH & Co. KG. iNet X and CP Plus are also trademarks of Truma Gerätetechnik GmbH & Co. KG. CampMatic is not an official Truma product and is not affiliated with Truma. Trademark references are used solely for compatibility purposes. CampMatic is plugged in only and can be removed without a trace. Warranty claims for Truma appliances are decided solely by Truma.
Behind CampMatic stands an established company from electronics, microelectronics and security technology. More about us →
Figures of FineSell GmbH (Chemnitz), the company behind CampMatic.
What Our Users Say
"Brilliantly simple! Installation really took just 10 minutes. Now I pre-heat my Grand California before arriving at the campsite."
"The Telegram bot is amazing. My wife now also controls the heating — right from the chat. And the frost alert already saved us once."
"As a Home Assistant user, this is fantastic: MQTT integration works perfectly. Integrated the box into my smart home and built custom automations. Top product!"
"Works as described. Plug in, connect WiFi, done."
"We spent a week in the Alps at -12°C. Heated the GC remotely every morning before getting up. Absolute must-have for winter camping."
"Solid product. Clean build quality, good documentation."
"Does what it should. Temperature history is a nice bonus. Looking forward to the GSM version."
"I'm not technical at all and managed the installation myself. The app is super intuitive. Best camper upgrade I've made."
"Runs rock-solid for me, and the Telegram notifications are brilliant."
"Top!"
"ioBroker integration running perfectly. OTA updates are a plus. This is how IoT products should work."
"The scheduling feature is exactly what we needed. Heating starts automatically before we arrive on Friday evenings."
"Had a question about the CP Plus firmware — support replied within an hour. Great product, great service."
"Works perfectly with my phone hotspot. Turn on hotspot, CampMatic connects automatically. Super easy."
"The 4G version is exactly what I was looking for. No WiFi, no hotspot fiddling — insert a SIM and it just works. I control the heating from the office now."
"Power consumption is truly minimal — even after two weeks in winter storage the battery is still full. Great product."
"I use an IoT SIM for under 2 EUR a month, works across Europe. Exactly the solution for campers without WiFi."
Ready for smart camping?
Choose the CampMatic that fits — with or without Truma control.
A few questions to the right setup · about 1 minute
CampMatic for Truma
WiFi version
- Control heating & hot water
- Monitor gas bottle
- Monitor leisure battery
- Monitor climate
Control your Truma heater & hot water via app, Telegram or Home Assistant. Also reads gas, battery and climate sensors over Bluetooth — sensors sold separately.
14-day right of withdrawal · Ships from Germany · Statutory warranty
CampMatic Guard
WiFi version
- Monitor gas bottle
- Monitor leisure battery
- Monitor climate
Reads gas (Truma Level Control, Mopeka or Senso4s), battery (BM2) and climate sensors (RuuviTag) plus Victron solar charge controllers over Bluetooth — live in the app, Telegram or Home Assistant. Same as the Truma model, just without heater control. Sensors sold separately.
14-day right of withdrawal · Ships from Germany · Statutory warranty
Questions? info@campmatic.de
Next up: CampMatic for Alde heaters
We're working on support for Alde 3020 and Alde 3030. Join the waitlist and be the first to know when it's ready.
Planned: Alde 3020 · Alde 3030