Back to overview Guide

Truma iNet Box: control your heater by app – no subscription, no SMS costs

Reading time: 6 min
CampMatic

This article is also available in: Deutsch · Français · Español · Italiano · Polski · Čeština · Svenska · Nederlands

Truma iNet Box: control your heater by app – no subscription, no SMS costs

If you have a Truma iNet Box in your vehicle, you know the principle: nearby, the Truma app connects over Bluetooth; on the road, everything runs on SMS. Every request costs money, there is no live status, and the SIM card in the box has to be paid for.

There is another way: your Truma heater can be controlled with an app that is always connected — with no subscription and no cost per request. Here is how it works, what it costs and what you need.

At a glance

  • CampMatic for Truma CP Plus takes the place of the iNet Box. Your CP Plus stays where it is and works as usual.
  • An app instead of SMS: for iPhone and Android or as a web app in the browser, with live status from anywhere.
  • Buy once, no subscription: WiFi variant €149, 4G variant €209. The app and access via our server are free.
  • Requirement: a CP Plus with firmware C4 or F4, P5 on the Vario Heat.

What the iNet Box costs when you are away from the vehicle

The iNet Box has done its job reliably for years. For remote control, however, it relies on SMS, and that comes at a price:

  • Its own SIM card with its own phone number. It sits in the box, is not included and needs a tariff with SMS.
  • Two text messages per action. One out, one back. Even just checking whether the heating is running costs money.
  • No live status, no notifications. You only ever see the last reply. The box never gets in touch on its own.
  • Abroad, roaming comes on top, depending on the card and the country.

Then there is the end date: the iNet Box has not been produced since 2023. According to Truma, there will be no more app updates from 1 January 2027 and no service and support from 1 January 2028. SMS control depends on the 2G network, which is being switched off step by step across Europe. In Switzerland it has been off since 2023. More on this: what the 2G shutdown means for the iNet Box.

The alternative: an app that is always connected

CampMatic for Truma CP Plus is a small box that sits in the same place as the iNet Box: on the heater's bus, next to the CP Plus. It is permanently online, over Wi-Fi or, with the 4G variant, over the mobile network. That is why the app behaves the way you expect an app to today:

  • Live status as soon as you open it: room temperature, operating mode, hot water and energy source are there straight away, with no request and no waiting.
  • Switch directly: set the temperature, switch on hot water, change between gas or diesel, electric and mix.
  • Timers: pre-heat on a schedule without having to think about it.
  • Notifications: via push or a Telegram bot, for example when the target temperature is reached or the box goes offline.
  • More in view: with suitable Bluetooth sensors, gas bottles and the leisure battery as well — and, if you like, everything in Home Assistant via MQTT.

This works with all compatible Truma heaters, i.e. Combi with gas or diesel and Vario Heat, whatever the vehicle.

What it costs: once instead of ongoing

  • The box: a one-off €149 (WiFi) or €209 (4G).
  • App and server: free, with no subscription and no monthly fee.
  • Internet in the vehicle: the WiFi variant uses an existing Wi-Fi network, for example a mobile hotspot. The box only needs a few megabytes a month. The 4G variant uses your own SIM card, such as an IoT SIM from around €2 a month.

There is no cost per request. Check as often as you like.

How to switch from the iNet Box to CampMatic

  1. Check the firmware: on the CP Plus, look under Settings → INIT. The version must start with C4 or F4, or with P5 on the Vario Heat. Important: the fact that your iNet Box works is no guarantee. The iNet Box already copes with C3.
  2. Remove the iNet Box: CampMatic itself registers with the heater as an iNet Box. Two of them on the same bus do not get along, so the original box has to come out. CampMatic takes over its slot. Depending on the wiring, there is an RJ12 coupler or a Y-adapter for this.
  3. Plug in and register: connect the box, run PR SET once on the CP Plus so the heater detects it, then bring the box online via Wi-Fi or SIM and register it in the app. It takes about ten minutes and needs no tools.
  4. Done: you keep operating the CP Plus as before. The app comes on top.

The steps with pictures are in the help section.

Frequently asked questions

Can the iNet Box stay installed as well?
No. Two devices that register as an iNet Box interfere with each other on the bus. CampMatic replaces the iNet Box. The details are in the FAQ.

Do I still need the Truma app?
No. You operate the heater in the CampMatic app or, as usual, on the CP Plus.

Does it work abroad too?
Yes. The WiFi variant wherever the box has Wi-Fi. The 4G variant with a SIM card that works in the country you are in.

I don't have a CP Plus but a Truma iNet X Panel.
Then there is a separate box that connects to the panel via Bluetooth: Control Truma iNet X by app – no subscription.

→ CampMatic for Truma CP Plus · WiFi — €149

→ CampMatic for Truma CP Plus · 4G — €209

Further reading: