No, a Truma Combi 4 or Combi 6 cannot be converted to E after the fact. On the E version, the electric heating elements sit in the heat exchanger, and Truma states clearly that they cannot be retrofitted to the standard model. If you want to heat electrically, the only way is to replace it with a Combi E.
Below you will find what the E version does differently, how the 4, 4 E, 6 and 6 E differ, and what a swap involves.
At a glance
- No retrofit: on the E version, the heating elements are integrated into the heat exchanger. Truma describes the electric option as "not retrofittable".
- Replacement only: Combi 4 for a 4 E, Combi 6 for a 6 E. A specialist workshop does the installation.
- No E-Kit for the Combi: the Truma E-Kit is only for the Vario Heat, and Ultraheat only for the Truma S 3004 and S 5004.
- The difference: 230 V heating elements with 900 or 1800 W, mixed mode up to 3800 W (4 E) or 6900 W (6 E).
- Extra cost: according to Truma's 2025 price list (non-binding), around €390 for the 4 E and around €540 for the 6 E, plus installation and the 230 V wiring.
Why the Combi cannot be converted to E
The E version is not an add-on module you bolt on. Truma integrates the electric heating elements into the heat exchanger at the factory. That is why Truma's FAQ answers the question of whether a standard Combi 4 or 6 can be retrofitted with heating elements with a clear no.
Truma's guide to Combi heaters also lists the electric option (Heat Hybrid) as "optional, but not retrofittable". It was the same with the older Trumatic C: according to Truma, the heat exchanger of the C 4002 is not designed for retrofitted heating elements.
What is the Truma Combi 6 E?
According to Truma, the Combi 6 E is the E variant of the Combi 6, with integrated electric heating elements for gas, electric or mixed operation. The same goes for the Combi 4 E. The number in the name stands for the gas output in kW, the E for the heating elements.
The differences according to Truma:
| Combi 4 | Combi 4 E | Combi 6 | Combi 6 E | |
|---|---|---|---|---|
| Gas | 2000 / 4000 W | 2000 / 4000 W | 2000 / 4000 / 6000 W | 2000 / 4000 / 6000 W |
| Electric 230 V | — | 900 / 1800 W (3.9 / 7.8 A) | — | 900 / 1800 W (3.9 / 7.8 A) |
| Mixed mode | — | max. 3800 W | — | max. 6900 W |
| Gas consumption | 160–335 g/h | 160–335 g/h | 160–460 g/h | 160–460 g/h |
| Weight | approx. 14.4 kg | approx. 15.5 kg | approx. 14.4 kg | approx. 15.5 kg |
| Water heater | 10 l | 10 l | 10 l | 10 l |
How mixed mode works
- Mix 1 means 900 W electric plus gas, Mix 2 means 1800 W plus gas. Electricity has priority; gas is added as needed. That reduces gas consumption.
- Mixed mode is only available for space heating. In hot water mode, the unit selects electric automatically.
- If the 230 V supply fails, the heater switches to gas automatically.
- If the gas runs out in mixed mode, the gas Combi carries on heating electrically and shows warning W 408 H. The diesel Combi, on the other hand, goes into fault mode.
- The campsite's fuse rating has to match the selected level. Unwind the cable reel completely.
What swapping to a Combi E involves
- Installation by qualified personnel: the manual requires this.
- 230 V connection: the E version needs a mains connection. It has its own 230 V fine-wire fuse (10 A quick-acting, to be replaced by qualified personnel only) and a mechanical overheating switch with a reset button.
- Control panel: the Combi E needs a CP Plus or an iNet X Panel. The older CP classic does not fit. The "energy type" menu only appears on heaters with heating elements.
- Cost: according to Truma's 2025 price list (non-binding), the Combi 4 E costs around €390 more than the Combi 4, and the Combi 6 E around €540 more than the Combi 6. The prices are each with an iNet X Panel, without the flue system and water connection kit. Installation and the 230 V wiring come on top. Your workshop will give you the cost.
- Fitting: whether the connections and installation space fit without changes is something the workshop clarifies on your vehicle.
What about the E-Kit and Ultraheat?
Both names come up often when searching for an electric retrofit. For the Combi, neither is a solution:
- Truma E-Kit: approved only for the Truma Vario Heat. According to Truma, it must not be used while driving.
- Truma Ultraheat: only fits the Truma S 3004 and S 5004 heaters.
- CombiNeo: Truma also offers the CombiNeo 4 E and 6 E, with electric heating up to 3 kW. That is a separate range, not a conversion kit for the Combi.
Combi E by app: the energy mix from anywhere
With CampMatic you also control the energy type on E models: gas or diesel, electric or mix. That is handy when you are on hook-up and want to save gas. On top of that come temperature, hot water, timers and notifications when there is a fault.
CampMatic works with all compatible Truma heaters: Combi 4, 4 E, 6 and 6 E, Combi D 4, D 4 E, D 6 and D 6 E, and the Vario Heat. On the CP Plus you need firmware C4 or F4, P5 on the Vario Heat: CampMatic for Truma CP Plus. For the iNet X Panel there is a separate box with no firmware requirement: CampMatic for Truma iNet X.
Frequently asked questions
Can I retrofit electric heating to a Truma Combi 4?
No. On the Combi 4 E, the heating elements sit in the heat exchanger, and according to Truma they cannot be retrofitted to the standard model.
Can I swap my Combi 4 for a Combi 4 E?
Yes, replacing the unit is the only way to get the E function. A specialist workshop does the installation, including the 230 V connection.
Can I convert a Combi 6 to a 6 E?
No, here too the only option is to replace it with a Combi 6 E.
What is the Truma Combi 6 E?
The E variant of the Combi 6 with integrated heating elements: gas up to 6000 W, electric at 900 or 1800 W, up to 6900 W in mixed mode.
Is the Truma E-Kit available for the Combi?
No. The E-Kit is approved only for the Truma Vario Heat.
→ CampMatic for Truma CP Plus · WiFi — €149
→ CampMatic for Truma CP Plus · 4G — €209
→ CampMatic for Truma iNet X · WiFi — €149
Further reading: